Oak – Antique


Red & White Oak Mixed
Barns, corn cribs, stables, mills, homes and other buildings and agricultural structures from different locations in North America.
Heritage Originaltm
Unlimited. Some knots are loose, broken or fallen out.
Moderate surface checking. Some cracking and unlimited small to large worm holes are allowed as long as the board is sound.
Nail/Bolt Holes:
Random nail holes. Occasional bolt or peg holes. Nail and bolt holes commonly have some stain surrounding the hole.
Grain Pattern:
Percentage Sapwood:
Minimal to medium depending on source.
Light tan, pinkish, brown, gray.
2.9 lb./Sq. Ft.
Natural weathering, saw kerfs and character marks present.
Standard Dimensions:
a. Thickness: ¾”
b. Width: 3” –11” – Call for wider available widths.
c. Length: 1’ – 10’ with no more than 25% of total footage under 4’ in length.
Textures Available:
Skip Planed – This texture is achieved by lightly planing the weathered lumber leaving much of the natural surface with saw marks, checking, holes and weathering. The look of the skip planed material will vary substantially from piece to piece.
Additional Options:
Machine, Hand Scraped or Draw Knife Beveled Edges & Ends, Pegs.
Texturewood® flooring can be installed on and above grade level. It is not recommended that this flooring be installed below grade. Installation procedures may vary (i.e. reclaimed versus new floors, or strip versus plank flooring, etc.) We recommend consulting with a professional flooring installer, and following National Wood Flooring Association installation guidelines.
Moisture Content:
Shipped at 6%-8.5% average. Moisture content may vary some based on the humidity level of the installation site. Therefore, we recommend flooring be acclimated on the job site in the same environment in which it will remain once installed, for a period of 1 to 3 weeks.
Texturewood® unfinished solid wood. Consult with your professional flooring installer for jobsite finishing.
Texturewood® precision tongue & groove edges with standard double cut & squared ends. End matching available upon request.
Average with some shrinkage and expansion.
We recommend approximately 15% cut and waste on traditional sub floor installations.
Janka Rating:
White Oak 1360, Red Oak 1290.
Character marks such as knots, checks/cracks, worm holes, sap, and natural color and grain patterns will vary in each plank within a sample. This is more so in reclaimed wood due to weathering and use. Therefore, your floor will vary somewhat from samples and pictures shown.